Over the years so many brilliant droid builders have contributed to R2-KT. Starting with the first crew who donated parts for Jerry Greene’s first build to those who help KT at shows to regular repairs, so many people make the magic happen. Thank you to all the geniuses who make the Pink Droid look so good!
Original Build:
Jerry Greene: Ankles, Outer – Aluminum; Ankle Brackets, Outer – Aluminum; Ankles, Cylinder Holders – Aluminum; Ankles, Cylinders – Aluminum; Ankles, Side Details – Aluminum; Ankles, Wedges – Aluminum;
Body, Coin Slots – Aluminum; Body, Restraining Bolt – Aluminum; Body, Side Vents – Aluminum; Body, Skirt – Aluminum; Feet, Center Foot – Steel; Feet, Outer Feet – Steel; Feet, Hose Fittings – Aluminum; Leg, Shoulder Buttons and Hydraulics – Aluminum
Jerry Greene & Shop: Legs, Outer – Aluminum; Leg, Horseshoes – Aluminum
Azman Sugi: Dome, HP Lens – Acrylic; Dome, HP’s – Resin; Dome, Rear Logic Display – Resin
Tom Doucet: Misc, 2″ Plastic Ball Casters; Misc, Electrical connectors; Misc, 12 Channel RC Switch for Sound Board
Keith & Andy: Body, Large Data Port – Resin; Feet, Sides – Resin; Leg, Struts – Resin; Leg, Booster Covers – Resin; Leg, Under Shoulder – Resin; Dome, Front Logic Displays – Resin
“Shag”: Misc, Feet Drive Parts – Scooter Motors, Wheels and Belts; Misc, Rockler Bearing – Aluminum; Body, Skins – Aluminum
Kevin Helmig: Misc, Motor Controllers; Misc, Receiver & Transmitter (RC)
Dan Stuetten: Body, Power Coupling Internals – Resin
Jerry Greene & Mark Kingery: Body, Frame – Aluminum
Guy Averett: Body, Center Leg Mtg. Brackets – Aluminum; Dome, Drive – Aluminum
Marcus Kraus: Body, Front Vent Internals – Resin
Nick Murray and Chris Lee: Body, Utility Arms – Resin
Jon Lyna: Body, Leg to Body Hubs – Aluminum
David Shaw, Ron Barklay, Anna Aytes, Benjamin Perron, Craig Rundels, and Brian Grisson: Dome, R&J – Aluminum
Jim Shima: Dome, Electronic Lights
Mike Velcheck: Feet, Braided Hose – Bronze
Frank De Brouwer: Feet, Strips – Aluminum; Ankles, Center – Aluminum
Craig Smith: Feet, Battery Boxes – PVC
Tony Carter: Body, Octagon Ports – Resin
Vincent Sanchez: Speakers
Greg Tracy: 12 Volt Batteries
Darryl Sorensen: Circus Pink Spray Paint & JB Weld
Kimihiko Nakamura: $100 towards construction costs
Victor Franco: $100 towards construction costs
Yasuyuki Sato & Goro Inoue (Japan 501st Garrison): $300 – Money for Sound System
Victor Franco, Brian Clark, Yoshi, Raul Raygoza, Goro Inoue, David, Mark Schwarz, Philippe Phung: $500 for delivery
Tom Jozwiak: Wire and remote control
Mike Senna: Skin Assembly
Alex Kung: Feet Drive Assembly
Kelly Krider: Assemble Dome and Dome Electronics
Raffox: Donated Skirt
Jeff Storm: Assorted Droid Parts
Damien Metz: Logic Display Holders, Dome Bezels (all 3 front and back) and 12V rechargeable battery for the dome lights.
Paul J. Bussiere: PSI lights (front & back)
Greg Tracy: R2KT vinyl sticker
Pat Coajou: Scotor motor holders
Heath MacMillan and Kelly Krider: Budget Aluminum Feet
Fall of 2008:
Darryl Sorensen: 3 Batteries
Max Cerventes: 12 channel remote Antenna
Kevin Helmig: 12 volt battery tender charger and 12 channel remote
Ethen Eho: Power Distro board
Mike Senna: Battery elimination circuit board
Doug Dixon: Battery charger and connectors
Arnold Tompkins: 12 volt fuse block
Jerry Chevaliar: Ankle Blocks
2009:
Darren Murrer: Aluminum Large Data port
Oscar Banos: Aluminum Arms
Tiny Panganiban: Spektrum Transmitter and BR6000 Receiver
Nick Bishop: Case for Transmitter
Tom Doucet: Aluminum Vent Internals
2010:
R2-KT received an invite to be in a wedding in 2010 and it was apparent she was overdue for repairs to her wheels and drive system. Andy Schwartz and Dan Baker to the rescue as they prep’d for the big day. Among the supporters were more donors among the builders. These guys make the entire thing possible so a big thanks go out to all of them.
Greg Tracy: new wheels
James VanReenen: Knurled fitting lock plates
2015:
Christopher Moody: CFSound audio system and wrote the code for her sound system